Please login or register.

Login with username, password and session length

Author Topic: Will Firecracker S/W run on WIN10 64bit?  (Read 1298 times)

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 157
  • Posts: 1406
Will Firecracker S/W run on WIN10 64bit?
« on: September 15, 2018, 09:51:32 PM »

I was digging through some boxes that have been sitting for several years and found my old Firecracker. I installed the Firecracker S/W from the X10 site just to see if it works.  The program opens and I can open the setup screen but then the program freezes and it takes a 3 finger salute to get out.  If I start the program and click a button same thing.  Not a big deal as I don't need to use the thing but just curious.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Will Firecracker S/W run on WIN10 64bit?
« Reply #1 on: September 15, 2018, 10:22:01 PM »

It has been a while since I played with old X10 software on Win 10.
If I remember right it has to be run in compatibility mode for XP.
 >!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 157
  • Posts: 1406
Re: Will Firecracker S/W run on WIN10 64bit?
« Reply #2 on: September 15, 2018, 11:39:52 PM »

I suspected that might be the case. Thanks!
Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Re: Will Firecracker S/W run on WIN10 64bit?
« Reply #3 on: September 16, 2018, 10:06:09 AM »

Which firecracker are you using? There were two, you know.  Not the software, but the hardware. A 17 or a 19?
Logged
Remote control is cool,

but automation rules!

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 157
  • Posts: 1406
Re: Will Firecracker S/W run on WIN10 64bit?
« Reply #4 on: September 16, 2018, 11:11:26 AM »

This is the 17.  I have a 19 in my other place working with Alex10. My PC actually has a serial port so I just wanted to see if the 17 still worked.
Logged

Knightrider

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 62
  • Posts: 1748
  • I love my WM100!
    • This Automated House
Re: Will Firecracker S/W run on WIN10 64bit?
« Reply #5 on: September 16, 2018, 12:52:22 PM »

I'm wondering if the lockup is due to way out of date hardware.
Logged
Remote control is cool,

but automation rules!

brobin

  • Hero Member
  • *****
  • Helpful Post Rating: 157
  • Posts: 1406
Re: Will Firecracker S/W run on WIN10 64bit?
« Reply #6 on: September 16, 2018, 03:03:55 PM »

I'll be back at our other place at the end of the month where I have an XP machine still running and I'll try it there. I think it's just the old software as it locks up whether or not the 17 is even plugged in.  I'm in the midst of an "archaeological dig" through some boxes that have followed me around through 12,000 miles of moves for far too many years and the Firecracker turned up.  I've also found an elementary school report and a "candy dish" I made in 7th grade wood shop!   
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Will Firecracker S/W run on WIN10 64bit?
« Reply #7 on: September 16, 2018, 03:24:16 PM »

There are actually two versions of this software one with out the USB drivers and one with. If I remember the one without the USB drivers didn't work for me in Windows 10 the one with the drivers did.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.