Please login or register.

Login with username, password and session length
Advanced search  


Pages: 1 [2]

Author Topic: WM-101  (Read 483 times)


  • Hero Member
  • *****
  • Helpful Post Rating: 5
  • Posts: 153
Re: WM-101
« Reply #15 on: December 03, 2018, 01:22:26 PM »

Ok,dumb question...

Is this a "PnP" device akin to the 100?  In other words, is this device all I need to get going?  Iím not in a position to purchase additional hardware and/software beyond the X10 modules that I currently have.


  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 37
  • Posts: 2422
Re: WM-101
« Reply #16 on: December 03, 2018, 02:29:11 PM »

This is intended as a multipurpose device.

It can function standalone as a WiFi-to-X10RF transceiver similar in function to the TIP10RF device that was sold in the European market. Here, it can be paired with a TM751, RR501, PAT03, etc. to go from WiFi-to-X10RF-to-PLC.

It can plug into a CM11A or XTB-232 and function as a WiFi-to-PLC transceiver. In this mode, it is compatible with existing software for the CM11A, connecting via its internal USB-to-Serial converter.

It can also be used internal to the XTB-232 turning it into a self contained WiFi-to-PLC transceiver with a USB-to-Serial connection.

All three modes require an external 5V supply either from a PC connection or a 5V 500mA USB power supply.

All three modes have a battery backed RTC and an 8KB EEPROM for timers & macros.

It is still a few months away.
This message was composed entirely from recycled letters of the alphabet using only renewable, caffeinated energy sources.
No trees, wabbits, chimps or whales died in the process.
Pages: 1 [2] | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.