Please login or register.

Login with username, password and session length
Pages: 1 [2] 3

Author Topic: Latest update taken for HG, now cannot connect  (Read 3777 times)

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #15 on: March 29, 2019, 09:09:55 PM »

Well an adventurous day to say the least.

Latest update hosed things.  Ended up going back to a saved image, which I now have on my SD card.

However, it seems to be the initial image and not one I saved - or at least I'm not really sure.

If i have an HDMI cable attached to the Pi I can see the splash screen - but if I try and connect via putty using the old IP address I get no connection.

And looking in my router I do not see the device connected at all.  So not really sure what happened.

Maybe time to start from scratch and get a new image etc - does the latest image use the Alexa interface that is integrated in HG or is it still the one with both as separate services ?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Latest update taken for HG, now cannot connect
« Reply #16 on: March 29, 2019, 09:27:34 PM »

The latest image has the echo bridge (integrated Alexa)and no HA-Bridge.
if you can view the splash screen once that vanishes you can get to the pi configuration screen to setup shh and your wi-fi and may not to totaly start from scratch.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #17 on: March 29, 2019, 09:33:25 PM »

I was at the splash screen and thought I updated wifi - I had to scramble to find a keyboard.


I ended up at a prompt asking if I want to update and answered yes.

Now I don't get the splash screen.

Is there a way to edit the wifi info from the command line?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Latest update taken for HG, now cannot connect
« Reply #18 on: March 29, 2019, 09:42:43 PM »

at the prompt type
Code: [Select]
sudo raspi-config that will open the configuration UI to set you  pi settings do them all as out lined in the setup thread to be sure nothing is missed
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #19 on: March 29, 2019, 09:44:54 PM »

I just found that command to get the config screen too😁

Trying it now
Logged

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #20 on: March 29, 2019, 09:53:32 PM »

It's back - with the original setup.

Loading my back up now
Logged

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #21 on: March 29, 2019, 10:02:44 PM »

OK - back up and can access HG again.  I did NOT take an update.

What I plan on doing tomorrow is getting another SD card (I had one but its fried).

Then getting the new image for the X10Pi and using that and hopefully can use the same restore file to get that up and running.

Before I do, is there something I should do to remove my password for access before trying to update to the latest version of HG again?
Logged

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #22 on: March 30, 2019, 09:28:32 AM »

I *think* I cleared my password and am making a backup of the configuration with that setting.

Assuming this is the correct place to Clear the password then I am all set:
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Latest update taken for HG, now cannot connect
« Reply #23 on: March 30, 2019, 09:29:59 AM »

yes make a backup after you clear the password just in case.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #24 on: March 30, 2019, 09:32:22 AM »

K, just did that.  Thanks once again for your assistance.

I am now downloading version 1.2 of the PiX10Hub and going to install that on a new SD card I bought.  Then I am going to restore my backed up (no password) configuration to that once I swap the SD card into the Pi.

Hoping that goes smoothly and also gets me to the point where I have also updated HG to use the integrated Alexa Hub :)
Logged

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #25 on: March 30, 2019, 10:23:28 AM »

@tuicemen

I installed Pix10Hub version 1.2 image on my new SD card.  I updated the config file for the wifi info and then stopped by currently running server on the hub, removed the present sd card (the backup one from last night) and inserted the new one.

Connected the power again and waited a minute or so.

I was able to connect using putty to the pix10hub, supplied user and pwd.  Was prompted with a question if I wanted to update - I answered N then hit return.

It then gave me my ip[ address as well as the port HG is running on (and none for alexa hub, which is good).

I never had to go thru the steps in the PiX10 Install Tutorial to Expand the File system?

I was able to connect to it via a browser and am restoring my backup configuration (without the password).
Logged

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #26 on: March 30, 2019, 10:32:25 AM »

Everything appears back with the restored config.  I also just turned on the "Amazon Echo Interface: and it went thru a bunch of things that looked like it was setting up my devices.
Logged

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #27 on: March 30, 2019, 11:11:05 AM »

OK - back up and running with version 1.2 of the PiX10Hub and my devices (along with Alexa) working again.

I am going to hold off taking any HG updates for awhile and make sure everything is good before proceeding with that.

Thank you for your help.   NOTE: My password in HG is still cleared, will hold off on that for awhile too.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Latest update taken for HG, now cannot connect
« Reply #28 on: March 30, 2019, 11:13:28 AM »

you need to expand your file system! The down loaded image doesn't open up all your SD free space
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

soxfan1966

  • Hero Member
  • *****
  • Helpful Post Rating: 3
  • Posts: 388
Re: Latest update taken for HG, now cannot connect
« Reply #29 on: March 30, 2019, 11:20:11 AM »

So I should still do this even with everything running ?
Logged
Pages: 1 [2] 3
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.