Please login or register.

Login with username, password and session length
Advanced search  


The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Pages: 1 2 3 [4]

Author Topic: SC9000 X10 Security Console and HomeGenie  (Read 1529 times)


  • PI Expert
  • Hero Member
  • ******
  • Helpful Post Rating: 19
  • Posts: 1328
Re: SC9000 X10 Security Console and HomeGenie
« Reply #45 on: December 06, 2019, 04:28:56 PM »

Yes this definitely works with the North American DS7000. I don't have a newer security console but the same codes should work in newer models.

Yes Iíve received enough reports to verify that HG RF Send is now communicating directly with the X10 security console. There was some confusion (not from my end I can assure you) about the external api web call from a browser being used as the test metric but that was already confirmed a while back. This was purely an internal HG RF Send command to the X10 security console via the CM15 and CM19 and both are confirmed working now.

Codes can be extracted easily once the user has the RF Send set up correctly. You could say this would confirm that their setup is functioning correctly. I donít generally post codes on forums. Encourages lazy practices as far as Iím concerned.
Pages: 1 2 3 [4] | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.