Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: SC1200 Security console  (Read 528 times)

robitec

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
SC1200 Security console
« on: July 24, 2020, 09:27:36 AM »



Hello every one . New person here. Well at least to the forum.
I have been using X10 for many years.
So my question is with the SC1200 Security Console
I would like a

Remote numeric keypad that can arm/disarm the system? I have contacted X10 and they say that is not an option.
What about using say a Raspberry Pi that has a touch numeric keypad added to it to do all of the functions that the  SH624 Security remote can?
If so Id need the how to on creating it :)

Has anyone tried using other security wireless keypads with any success?

Now I know I'm going to here,, Why not just use the SH624 and be done with it. My wife freaked when I explained another remote in the car to
Arm/Disarm a security system. She also commented that if someone broke into the car  :)

Thanks in advance   rob
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 291
  • Posts: 12837
Re: SC1200 Security console
« Reply #1 on: July 24, 2020, 11:00:48 AM »

The SH624 uses an RF Frequency of 310MHz and security protocol for Security functions. To do security related things.

So you would have to have a Keypad that has the proper RF frequency and protocol to be used by the SC1200.

I seriously doubt any other wireless consoles remote keypads would work. Every vendor uses their RF frequency and protocol.

Same for a wired in one if you wanted to hack the SC1200.

The PiX10Hub and Home Genie  maybe able to do something. I an sure others will post their findings.
http://forums.x10.com/index.php?topic=30714.0
http://forums.x10.com/index.php?board=166.0
« Last Edit: July 24, 2020, 11:05:20 AM by Brian H »
Logged

robitec

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: SC1200 Security console
« Reply #2 on: July 24, 2020, 11:18:44 AM »


http://forums.x10.com/Smileys/default/smiley.gif

Thanks Brian for your response.
Something told me that this was not going to be all that easy.

I have thought about a hack.
Tear apart the SH624, solder leads to each of the buttons I want to use and connect them to a keypad that has
a NO contact that is activated with the correct code.

I have an old KR10A that I thought Id try to use but its finished. Left the batteries in   ( melt down )   http://forums.x10.com/Smileys/default/sad.gif

It is unfortunate the the designers at X10 didn't think about a remote keypad, but then again I'm usually the 1 that thinks up the weird stuff.

robitec
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 271
  • Posts: 10085
  • I don't work for X10, I use it successfuly!
    • Tuicemen Forum
Re: SC1200 Security console
« Reply #3 on: July 25, 2020, 07:15:01 AM »

It is possible to create an app that runs on a old phone or tablet. I did this years ago. It would allow 3 false button combination presses before locking and triggering the alarm console.
Using a pi  with the PiX10Hub you could do a simular setup or just log into Homegenie and trigger an arm disarm or panic call to your security console.
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Find extra info @ My forum
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.