Please login or register.

Login with username, password and session length
Advanced search  


The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: XCam Black & White Camera  (Read 3658 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
XCam Black & White Camera
« on: November 26, 2005, 10:43:49 PM »

I can't turn my XCam Black & White Camera
on using ActiveHome.  Do I need to buy the
Video software just to turn these on and

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 293
  • Posts: 12856
Re: XCam Black & White Camera
« Reply #1 on: November 27, 2005, 07:36:19 AM »

The addressable power supply should respond
to an ON OFF command on the address it is
set to. Do you have a module defined on that
address and can you send it from AHP? If you
are trying to use an RF Remote. Try this:
In AHP Tools; Hardware Configuration;
Tranceived House Codes. Make sure the house
code the remote and addressable supply is
using is set to enabled.
Also when the camera power supply is first
pluged in do you see video. You should as it
defaults to ON.
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.