Please login or register.

Login with username, password and session length

Author Topic: KG  (Read 1746 times)

kg

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
KG
« on: January 29, 2006, 02:07:40 PM »

Eagle Eye

I have an Eagle Eye Sensor which I setup to
turn on/off a light.

It appears to work in the living room...
where I setup and plugged in the USB
Computer Interface.

When I take it into the bedroom...  it
doesn't seem to work.

Question:  Does the sensor have to be close
to the USB Interface to work?  If the
answer is yes...   do I need a Repeater to
extend the range so it works in a distant
room?   We're talking maybe 50 ft from the
Interface to the sensor and an additional
15 feet to the lamp I wish to turn on...
which is in the bedroom.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: KG
« Reply #1 on: January 29, 2006, 02:26:52 PM »

You are using the cm15a USB Interface as the
receiver for the motion sensor? It is not
known for great recpetion distance of
signals. First I would try the cm15a antenna
horizontal. That sometimes adds distance.
The interface was not moved after the
original test, just the motion sensor?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.