Please login or register.

Login with username, password and session length

Author Topic: iWitness Video Adapter Driver won't install on...  (Read 9754 times)

rthomas

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
iWitness Video Adapter Driver won't install on...
« on: April 15, 2005, 12:09:58 AM »

I am unable to get iWitness and ActiveHome
Pro drivers to install and see the hardware
on WindowsXP MCE. HELP!
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: iWitness Video Adapter Driver won't install on...
« Reply #1 on: April 15, 2005, 01:16:22 PM »

The drivers included in the ActiveHome Pro
and iWitness installations should work fine
on XP MCE. There can be a couple tricks:

1) For the USB Video Capture Adapter (VA11A),
run the iWitness installation again while the
VA11A is connected. This will force Windows
to recognize the device correctly. When it's
done, you should see the VA11A listed under
Imaging Devices in Device Manager.

2) If you see an "uknown device" message when
connecting the CM15A, unplug it from the USB,
unplug it from AC power, and remove the
batteries. Wait a couple seconds, then
connect it all again and it should work.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.