Please login or register.

Login with username, password and session length

Author Topic: Found The Flah Problem  (Read 3940 times)

jerry r

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 15
Found The Flah Problem
« on: March 26, 2005, 07:56:28 AM »

Found the problem

Seems 3.183 will not execute any flag changes
by clicking on the macro (as in testing) but
if a macro is triggered it will set/clear
flags.

3.179 would allow testing by clicking on the
macro.

At least that is the case here.

Is this the way it is supposed to work?

Anyone confirm this?
Logged

martin

  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 125
Re: Found The Flah Problem
« Reply #1 on: March 28, 2005, 02:10:14 PM »

From the (rather short) help file of Smart
Macros: "...Only macros that run in the
ActiveHome hardware can set flags. If you
doubleclick on a macro from the ActiveHome
software it runs the macro in software and
the flags won't be set...".
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.