Please login or register.

Login with username, password and session length

Author Topic: Delay Feature doesn't calculate properly  (Read 6290 times)

nswint

  • Full Member
  • ***
  • Helpful Post Rating: 4
  • Posts: 49
    • Shiksa
Delay Feature doesn't calculate properly
« on: March 26, 2005, 12:32:58 AM »

The delay feature doesn't calculate properly.
It calculates using the default 00:05:00
instead of what you want to put in.  You have
to add several delays in and delete to get
the proper time.  Currently the delay will
only set at 5 minutes.  You  have to manually
set it to anything else
Logged

JimC

  • Hero Member
  • *****
  • Helpful Post Rating: 41
  • Posts: 631
Re: Delay Feature doesn't calculate properly
« Reply #1 on: April 01, 2005, 10:13:27 AM »

I am not experiencing this problem. I have
several delays set at other than 5 minutes.
I have several set at 1 minute and others
set at 10 minutes. They all work fine.
Logged
_ _ ...  ..._ _

donald mcmow

  • Hero Member
  • *****
  • Helpful Post Rating: 0
  • Posts: 306
Re: Delay Feature doesn't calculate properly
« Reply #2 on: April 01, 2005, 10:57:53 AM »

Noah: What exactly do you mean by the delay
not calculating properly? The "Default
Value" is just that, it's only meant to
assign a value to the variable. You have to
start someware - if you want a different
value then you can put what ever you want
in there. If you want to place a
different "DEFAULT" value in then goto
Preferences/Smart Macros and change it. The
computer/AHP program can't read your mind
to find out what you want to do.
Logged

julian

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 47
Re: Delay Feature doesn't calculate properly
« Reply #3 on: April 04, 2005, 10:53:41 PM »

Noah, I have delays anywhere from 20 seconds
to 1 hour. They seem to work fine, although
the 20 second delay is a few seconds less or
more, but not by much.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.