Please login or register.

Login with username, password and session length
Advanced search  


The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: Found The Flah Problem  (Read 3718 times)

jerry r

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 15
Found The Flah Problem
« on: March 26, 2005, 07:56:28 AM »

Found the problem

Seems 3.183 will not execute any flag changes
by clicking on the macro (as in testing) but
if a macro is triggered it will set/clear

3.179 would allow testing by clicking on the

At least that is the case here.

Is this the way it is supposed to work?

Anyone confirm this?


  • Sr. Member
  • ****
  • Helpful Post Rating: 2
  • Posts: 125
Re: Found The Flah Problem
« Reply #1 on: March 28, 2005, 02:10:14 PM »

From the (rather short) help file of Smart
Macros: "...Only macros that run in the
ActiveHome hardware can set flags. If you
doubleclick on a macro from the ActiveHome
software it runs the macro in software and
the flags won't be set...".
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.