Please login or register.

Login with username, password and session length
Pages: [1] 2

Author Topic: MultiView version 3.151  (Read 4693 times)

Lew

  • Guest
MultiView version 3.151
« on: April 27, 2005, 10:38:20 PM »

The Live Video caption is correct and
displaying the correct camera, but when it
stores a snotshot into the Snapshot area of
the GUI it is off by one window.

For example,

camera 1 goes into camera 2 spot
camera 2 goes into camera 3 spot
camera 3 goes into camera 4 spot
camera 4 goes into camera 1 spot

The last version did the correct snapshot
order.

As a side note: It would be nice to be able
to expand the number of windows on the GUI
up to at least 16 cameras. Each having their
own set-up tab like in the four camera
system you have now.
Logged

WinS

  • Sr. Member
  • ****
  • Helpful Post Rating: 14
  • Posts: 106
Re: MultiView version 3.151
« Reply #1 on: April 28, 2005, 02:19:47 PM »

Lew, I experienced the same thing when I was
using MultiView (now using iWitness).  The
timing between cams affects the window
placement. If you add more time between
images they will be placed in the correct
window. Or, if you're like me and require
faster scanning, you could just ignore the
window placement. Sorry I can't be of more help.
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: MultiView version 3.151
« Reply #2 on: April 28, 2005, 02:42:27 PM »

Lew: It sounds like the timing is off in
switching cameras and saving images. I'll see
if we can take a look here.

There's not much chance of our expanding
MultiView to work with more than 4 cameras,
but I'll pass along the suggestion.
Logged

Lew

  • Guest
Re: MultiView version 3.151
« Reply #3 on: April 28, 2005, 10:06:33 PM »

Thanks for your help.

How about making this open source code. It
would be fun to learn how to expand the
amount of cameras that it could use.
Logged

tony

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 72
Re: MultiView version 3.151
« Reply #4 on: April 30, 2005, 05:59:42 PM »

X10 Pro:

I have MultiView and 4 camera application
and Multiview has NEVER WORKED RELIABLY NOR
X10 RESONDED AT ALL, LET ALONE
SATISFACTORILY TO SAID REPORTED PROBLEMS IN
THE LAST 2 YEARS.

How about fix it or refund my money?
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: MultiView version 3.151
« Reply #5 on: May 02, 2005, 04:29:08 PM »

Tony: What doesn't work? We did release a new
version of MultiView right around when we
released ActiveHome Pro, and it fixed a major
problem with motion sensor activated camera
switching. Are you using that new version?
Logged

tony

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 72
Re: MultiView version 3.151
« Reply #6 on: May 02, 2005, 10:47:00 PM »

X10 Pro:  According to
http://www.x10.com/support/rev_mv.htm the
last release was 1/10/2003 that is over 2
years ago and that one was a disaster.
Options & capabilities that were there, were
gone, pictures upside down, it simply was a
blue screen special.  If you know of a later
one why isn't it at the above MV release
software history page?  I never received any
notification; even though I am registered
user and I have several software problem
reports that are in to X10 support now over
2 years and no response.

If there is a solution lay it on me, if not
I want a refund.
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: MultiView version 3.151
« Reply #7 on: May 03, 2005, 12:39:23 PM »

Tony: I just sent you an e-mail about this.
I'll have the revision history updated.
Logged

tony

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 72
Re: MultiView version 3.151
« Reply #8 on: May 03, 2005, 02:58:54 PM »

Thank You for the prompt response.
MultiView tech support was never like this.

Will give it my best "once over" and see how
she flies.

Regards,

Tony
Logged

tony

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 72
Re: MultiView version 3.151
« Reply #9 on: May 10, 2005, 02:21:54 PM »

X10 Pro:

I sent you an e-mail regarding problem
starting the download from the link you sent
me. Need a responce so that I could
continue.

Logged

tony

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 72
Re: MultiView version 3.151
« Reply #10 on: May 16, 2005, 10:47:29 AM »

X10 Pro:

I sent you some e-mails concerning MultiView
& AHP/CM15A.  Need your response.
Logged

tony

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 72
Re: MultiView version 3.151
« Reply #11 on: May 18, 2005, 04:30:48 PM »

X10 PRO:  I'm still waiting for your
response to my e-mails.
Logged

X10 Pro

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 1416
Re: MultiView version 3.151
« Reply #12 on: May 18, 2005, 04:57:48 PM »

Tony: Reply should be in your inbox now.
Logged

holger

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 36
Re: MultiView version 3.151
« Reply #13 on: May 19, 2005, 04:18:08 AM »

It hit me again, XP prof. SP2.
I do not use MultiView very often since I
have the iWitness Plugin - even with the
known errors.
My MultiView vers. 3.151 is aborting
immediatly when I start the MV Program. This
happened already some time ago in Nov04, -
with the AHP S/W installed Oct04.
The only thing to recover was at that time,
to restore an older image with PQ-Driveimage.
De-/and Re-installing of MV does not help at
all -> neither in Nov04 or now.
The MultView program 3.151 is not useable !!!
Logged

anonymous

  • Guest
Re: MultiView version 3.151
« Reply #14 on: May 20, 2005, 12:42:13 PM »

X10 Pro:
Please check your e-mail.  I need some
information at your earliest convenience.
Logged
Pages: [1] 2
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.