Please login or register.

Login with username, password and session length
Advanced search  


The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: Camera & Remote  (Read 3028 times)

j ivan jackson

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Camera & Remote
« on: February 07, 2005, 02:52:30 PM »

I have 4 camera and I have each on the
remote button.  But when I switch from one
to another you get two images of maybe two
different rooms, or bad piture.

duckman dave

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 23
Re: Camera & Remote
« Reply #1 on: February 10, 2005, 06:05:42 PM »

Hi J. If you are using 1 receiver,then set
all cams on the same letter.(ABC or D)and
your receiver the same letter. Then when
you switch cams,with the remote, one comes
on and the other goes off. One cam at a
time transmitting, if you are using
wireless cams.Wired cams work different.
Hope this helps.
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.