Please login or register.

Login with username, password and session length

Author Topic: Nightwatch 2 Cameras  (Read 3810 times)

j. warren

  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 16
Nightwatch 2 Cameras
« on: March 12, 2005, 05:47:20 PM »

I got a bunch of x10 stuff thru x10.com
about 4 months ago and waited to install it
in my new house....now that I am here....I
cant get the cameras to work. I have two
sets of wired cameras and two wireless
receivers....I tried doing an install for
just one set and it didnt work after
following the directions to a T. I tried it
3 times each on each set just to make sure
I was doing it right but neither one
works...any suggestions besides sending it
back??   :) Actually,  Maybe I will
Logged

cj

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Nightwatch 2 Cameras
« Reply #1 on: March 26, 2005, 02:22:30 AM »

Take the 2 wired cams and run them to your
vcr. Run one to the front a/v input and one
to the back a/v input. Tune the tv to
channel 3 or 4 witchever is corect for the
vcr. Now tune the vcr to line one or line
two or it may be called input 1 and input
2. This will tell if the cams work. Make
sure power supply is in correct numbers.
Now you can switch between 1 and 2 with the
vcr remote. Hope this helps.
cj
Logged

mmmmick

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Nightwatch 2 Cameras
« Reply #2 on: March 26, 2005, 04:04:14 PM »

  Get a witness before you send it back. I
returned an order unopened and was charged
for a missing compnonent. These guys are as
close to internet fraud as I've ever seen.
Logged

j. warren

  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 16
Re: Nightwatch 2 Cameras
« Reply #3 on: March 28, 2005, 08:26:24 PM »

I see my message was cut off by x10
haha...well anyways....for an update....I
sent the camera back with a receiver with
tracking number....I got a reply saying it
was received...now I am awaiting a message
to say they were sent
Logged

mmmmick

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Nightwatch 2 Cameras
« Reply #4 on: April 05, 2005, 10:36:45 PM »

Gotta say I got my credit after emailing x10.(See post below)It was applied less than aweek later. The first one never happened butgood service on the subsequent contact. Thxto Tom Horan and Tony McCarl @ x10.  
Logged

mmmmick

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Nightwatch 2 Cameras
« Reply #5 on: April 05, 2005, 10:36:51 PM »

Gotta say I got my credit after emailing x10.
(See post below)It was applied less than a
week later. The first one never happened but
good service on the subsequent contact. Thx
to Tom Horan and Tony McCarl @ x10.
Logged

j. warren

  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 16
Re: Nightwatch 2 Cameras
« Reply #6 on: April 05, 2005, 11:18:43 PM »

I must admit! X10 came thru. Not only did I
receive a new nightwatch 2 and receiver, I
also received an extra nightwatch 2 as well!

And they work!!
Logged

j

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 43
Re: Nightwatch 2 Cameras
« Reply #7 on: April 07, 2005, 12:29:08 PM »

these guys do come thru.
Logged

j. warren

  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 16
Re: Nightwatch 2 Cameras
« Reply #8 on: April 10, 2005, 12:15:06 AM »

Considering I purchased them last year it
was about time!
Logged

mmmmick

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Nightwatch 2 Cameras
« Reply #9 on: May 11, 2005, 03:28:15 PM »

Well, I got my credit but I also gotabsolutely NO response to both follow upemails I sent regarding the crashes that areoh so frequent with Windows XP. I had toremove the software again and now have 600bucks worth of crap in a closet. DON"T BUYTHIS JUNK YOU WILL NEVER GET MORE THAN TOKENSUPPORT. I was advised by Tony McCarl that hewould work with me to resolve my problem. Thesum total was an update that crashed XPimmediately and a link to the download page.I managed that part myself. Thx for nothing Tony.Thuis is essentially an internet scam as faras I can see and I am going to the RCMP inCanada to see about pressing charges.
Logged

mmmmick

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Nightwatch 2 Cameras
« Reply #10 on: May 11, 2005, 03:28:20 PM »

Well, I got my credit but I also got
absolutely NO response to both follow up
emails I sent regarding the crashes that are
oh so frequent with Windows XP. I had to
remove the software again and now have 600
bucks worth of crap in a closet. DON"T BUY
THIS JUNK YOU WILL NEVER GET MORE THAN TOKEN
SUPPORT. I was advised by Tony McCarl that he
would work with me to resolve my problem. The
sum total was an update that crashed XP
immediately and a link to the download page.
I managed that part myself. Thx for nothing Tony.
Thuis is essentially an internet scam as far
as I can see and I am going to the RCMP in
Canada to see about pressing charges.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.