Ok, I tried searching on this topic but I
couldnt find anything. Notice, I am not
having a problem with the lights, I have
that area pretty well covered. I hardly use
the cams, I have 4 so far set up, two flood
cams and two wireless... floodcam #1 DOES
NOT turn the camera off, so when I switch
from floodcam 1 to floodcam 2, I get the
mixed video signal, the same if I turn on
wirelesscam 1 or 2. I know just the
switching away from one cam to the other,
it turns off the previous cam. It is not
doing that, I have tried pressing off on
the remote for that particular floodcam and
it does not turn off the cam. I switched
off the power for that line and so far that
is the only way I can get that camera off
to be able to view the rest, now whats the
point on getting an automated cam if I have
to manually switch it off and on. I have
tried both the manual settings and the auto
settings for the cam, neither one responds,
the cam stays on all the time.
any suggestions? Thanks!
Author
Topic: Cam on Floodcam not turning off (Read 2685 times)