Please login or register.

Login with username, password and session length
Advanced search  

News:

The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: USB video interface repair saga  (Read 7752 times)

al t.

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
USB video interface repair saga
« on: September 19, 2005, 12:03:08 AM »

A couple of months ago I purchased the Home
Automation, IWittnes combo. It all worked
except for the usb interface, the symtom I
had that it was fine for about 5 minutes
then the computers window for the camera
went blank. I confirmed the output of the
receiver directly to a tv and it was fine.
I tried reloading the software drivers many
times but the problem never went away,
sometimes it got worse. Tech support really
thought I had not installed the software
drivers correctly but helped me out by
sending a new interface just in case which
fixed the problem immediately. I wanted to
share this solution in case someone else
was having the same problem.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.