Please login or register.

Login with username, password and session length

Author Topic: Socket Rocket always on?  (Read 9903 times)

ohmarty

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Socket Rocket always on?
« on: November 17, 2005, 06:47:38 AM »

I had a brand new RLM20 (Socket Rocket) set
to default A1. It was working fine until the
bulb blew. Now it is always on. I can't get
to shut off or reprogram it. I have several
that I have set many different codes with no
trouble. Is this one just useless anymore?
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Socket Rocket always on?
« Reply #1 on: November 17, 2005, 06:54:48 AM »

The surge from the lamp burning out has
shorted the triac [component that turns the
thing on and off]. It is now useless. I have
burned out three the same way and have put
any remaining I have in a box unused!
Someone here has had sucess in changing the
part in theirs, I now use the X10 screw in
dimmer that is bigger but offhand forget the
part number.
Logged

ohmarty

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Socket Rocket always on?
« Reply #2 on: November 17, 2005, 09:13:16 AM »

Thanks. That screw in dimmer is SL575, but
it's too big for my application. I've asked
X10 for some help, but haven't anything as
yet.
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Socket Rocket always on?
« Reply #3 on: November 17, 2005, 01:00:18 PM »

FYI Light bulb burning out and shorting
triac.

An enormous number of years ago, I remember
reading that burn-out of Phillips brand
lightbulbs shorted the triacs far less often
than other brands. The speculated
explaination was: Phillips did not stretch
their filiment, in manufacture, as taut as
other brands . The bulb is less likely to
burn out at turn-on (turn-out burn-out
usually happens when the switch makes
contact, or the triac fires, when the AC
sine is at peak - creating larger inductive
kick when the filiment breaks which is
greater than the mediocure 400v PIV triacs).
I don't know if true or not, but I do know I
have had Phillips bulbs burn out and the
lamp module(s) survived.

FWIW
Logged
"This aftershave makes me look fat"

jerry r

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 15
Re: Socket Rocket always on?
« Reply #4 on: December 01, 2005, 09:06:43 PM »

X10 should improve this product before
selling it and replace the defective ones
that have been sold!  I have 4 of these
that have blown over the past 2 years.  I
don't know about you, but I don't like
paying $20 every time a light bulb blows.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Socket Rocket always on?
« Reply #5 on: December 02, 2005, 06:07:34 AM »

X10 replaced a few of mine, but if memory
serves me. I had to pay the poatage back to
them. I actually had one DOA right from the
box. I doubt X10 will do much about the
problem. Thay are too busy pushing their
wares. Even those stupid pop ups and pop
unders are back!
Logged

dick

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 47
Re: Socket Rocket always on?
« Reply #6 on: December 02, 2005, 08:31:33 PM »

I use DuraMax (made by Phillips) in mine
and have had several bulbs burnout but no
socket rockets.  Just lucky, I guess that I
settled on that brand of bulb.  I use them
because they are available in 25 and 40
watt small bulb configuration which is
perfect for my night time use.
Logged

mike ellaby

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: Socket Rocket always on?
« Reply #7 on: December 05, 2005, 07:15:42 PM »

I put 2 lights into one of these sockets
and when 1 bulb blows there is no surge
cause there is still the load from the
othere bulb. That is my assumption cause I
have only had 1 bulb blow since and it did
not fry the socket rocket.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.