Please login or register.

Login with username, password and session length

Author Topic: EagleEye dusk/dawn is Unit code +1 Can that be changed?  (Read 3015 times)

capple

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 30
EagleEye dusk/dawn is Unit code +1 Can that be changed?
« on: January 20, 2006, 04:48:40 PM »

The instuctions states " The default House
and Unit Code transmirred when dusk/dawn is
sensed is Unit Code + 1 (i.e. A 2) on at
dusk, A2 off at dawn."
I read that and it tells me I can chang it
to Unit Code + (1-16).
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: EagleEye dusk/dawn is Unit code +1 Can that be changed?
« Reply #1 on: January 20, 2006, 07:22:47 PM »

Yes you can change both the House Code A-P
and the Unit Code 1-16. By button sequences.
The Dusk/Dawn is always the motion sensors
address +1; like Motion B1; Dusk/Dawn
B1+1=B2. Now if you say; OK I will use like
B16 for my motion there is no B17 so I get
no Dusk/Dawn. Nice try. I believe it loops
back to B1. One of the sensors if memory
serves me; MS15A Indoor and MS16A
Indoor/Outdoor Active Eye can be set to only
send if it is dark or all the time and if
you want the Dusk/Dawn signal on unit+1 to
be disabled.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.