Please login or register.

Login with username, password and session length

Author Topic: VCR Commander II-Is it possible to shorten the record time?  (Read 2958 times)

MaxiOmega

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 4

Is it possible to shorten the record time from 5 minutes down to one? When it records 5 minutes past the eagle eye cut off, means you go through 6 minutes of tape with each movement it sees.
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: VCR Commander II-Is it possible to shorten the record time?
« Reply #1 on: October 29, 2006, 01:10:34 PM »

Is it possible to shorten the record time from 5 minutes down to one? 

Unfortunately NO... it would be nice to have control over this.

When it records 5 minutes past the eagle eye cut off, means you go through 6 minutes of tape with each movement it sees.

Actually it goes 5 minutes past the last motion detector ON sent.
Since you are using a VCR and recording anyways, maybe increase the EagleEye's OFF time to have the CAM stay on longer and just have a smaller blank gap between activations.  ;)
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.