Please login or register.

Login with username, password and session length
Advanced search  

News:

The X10Hub (PiX10Hub) is here! Created by the Community, for the Community.:)% #:)

Author Topic: Cannot Pan/Tilt/Zoom with Web Client  (Read 6709 times)

hocuspocus

  • Jr. Member
  • **
  • Helpful Post Rating: 1
  • Posts: 18
Cannot Pan/Tilt/Zoom with Web Client
« on: August 03, 2006, 11:57:37 AM »

I have a sentinel camera, but since the web client does not recognize it properly, I use the Vanguaard module.  When I first set up the camera all PTZ functions worked from the web client.  I have no problems using PTZ within the desktop AHP application.  Now I can no longer control the camera from the Web client.  I can see the image from the camera, but cannot pan/tilt/zoom.  The activity monitor does not even register a command when I push the buttons from PTZ on the web client.  I have removed the module, readded the module, rebooted all equipment, did an ancient voodoo dance and still the same result...no PTZ.  My cams that are mounted on the ninja base work fine from the web interface.

Any thoughts/suggesstions/help would be greatly appreciated!

Thanks,
Mike
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.