Please login or register.

Login with username, password and session length
Advanced search  


The Buster PiX10Hub is here! Created by the Community, for the Community.:)% #:)

Author Topic: how do I do it  (Read 2289 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
how do I do it
« on: September 01, 2006, 11:16:04 AM »

what would I need if I wanted three wall switches were there is none to controll two lamps going on and off at the same time I prefer eateher a screw in lamp module or a module to plug into the wall what ever works best
 also what would the product #s be
« Last Edit: September 01, 2006, 11:20:26 AM by jerrydehoog »


  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 16
    • Personal Site
Re: how do I do it
« Reply #1 on: September 01, 2006, 11:45:20 AM »

(This message is in the wrong forum and I'm sure it will be moved, but to answer it...)
Light Switches - look at either SS13a or SS15a.  You'd need three for the configuration you specified.
Receiver for switches - a TM751 would be enough.  The TM751 could also function as one of the plug in modules for the lamps.
Lamp Controllers - either LM465 or LM15a.  You would need two in any combination or one if you wanted to use the plug on TM751 as one of the Lamp Controllers.

This set up will give you exactly what you asked for in the simplest possible way.  There are other options to make things fancier.  Also, be sure to check out TTA's tips in the General forum of Home Automation (I think).

Check out the $39.99 package on this page.  It might be worth it.  You'd just have to add the wall switches.

Darren Benham, RRT, AE-C

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: question
« Reply #2 on: September 01, 2006, 12:00:59 PM »

You might need Active Home Pro and modules. Check for their product line.
I don't SELL this stuff... BUT I sure do ENJOY using it!!! | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.