Please login or register.

Login with username, password and session length
Advanced search  

News:

The X10Hub (PiX10Hub) is here! Created by the Community, for the Community.:)% #:)

Author Topic: XPT and XP4D wall controler HELP!!!!!  (Read 6823 times)

the electrican

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
XPT and XP4D wall controler HELP!!!!!
« on: November 19, 2006, 03:13:09 PM »

ok it's wired but how do i program it !!!! it came with no instructions and there is nothing in active home pro, please help my intention is to run an all on macro, a room macro for only that room on / off ( it has 4 x10 dimmers currently ) and a perimeter lighting macro
please help or let me know if i am off base with this
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: XPT and XP4D wall controler HELP!!!!!
« Reply #1 on: November 19, 2006, 03:38:29 PM »

I do not believe there is any programming involved, other than selecting the House & Unit Codes on the XPT Base. For example, if you haven't moved any of the dials, it probably shows A & 1. This means that the switches on the XP4D will be addressed this way (from top to bottom):

A 1
A 2
A 3


In AHP, you can trigger your macros based on those addresses.

Thru a link provided by Charles Sullivan (Re: WS4777 with electronic fluorescent ) an XPT manual is available here xpt.pdf. (Not much of one however.)
Logged

the electrican

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Re: XPT and XP4D wall controler HELP!!!!!
« Reply #2 on: November 21, 2006, 02:28:05 PM »

thanks, i can't seem to get the macros to work but the rest is good
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.