🛡Home Security > Problems and Troubleshooting

Clearing Zones from SC1200

(1/2) > >>

LostDog88:
the book says to enter install menu. Hit 1 for install. Enter zone and press clear.

But the zone won't clear.

Since I have dogs now I want to clear out the one motion I have, but it won't clear.

Any ideas.

petera:

--- Quote from: LostDog88 on December 16, 2019, 07:08:01 PM ---the book says to enter install menu. Hit 1 for install. Enter zone and press clear.

But the zone won't clear.

Since I have dogs now I want to clear out the one motion I have, but it won't clear.

Any ideas.

--- End quote ---

A suggestion.

Now that you have FINALLY got your panel working with HomeGenie and have this problem maybe it could be a good time to reset your panel and re enrol your sensors and remotes with your panel. HomeGenie will be able to automatically pick up the RF codes from these during the process and assign each sensor it's technology name in HomeGenie.

Brian H:
After selecting the Clear option. Did the display turn to the Clear Zone choice of 1 Yes or 2 No?

LostDog88:
Yes. And when pressing one it stated.

Zone 2 Out

Zone 2 is not out however.  B:( B:(

Brian H:
Not sure it if it makes a difference.

Did you back all the way out to the main display after the change and then see if it still has that zone in use?

Navigation

[0] Message Index

[#] Next page