X10 Community Forum

💬General Category => General Discussion => Topic started by: Kayaken on November 17, 2014, 04:26:49 PM

Title: Ninga Power Suppy
Post by: Kayaken on November 17, 2014, 04:26:49 PM

Will a Ninga Pan & Tilt unit work with a XM13A or does it only work with the recomended XM14A?

Title: Re: Ninga Power Suppy
Post by: Tuicemen on November 17, 2014, 05:05:41 PM

No the out put is not the same
You can view the specs of each on the x10 wiki  (http://kbase.x10.com/wiki/Main_Page)

Title: Re: Ninga Power Suppy
Post by: Brian H on November 18, 2014, 06:14:00 AM

The XM13A is 12 volts at 80mA.
The XM14A is 12 volts at 200mA.
An XM13A would be over loaded trying to run a Ninja.

http://kbase.x10.com/wiki/XM13A
http://kbase.x10.com/wiki/XM14A