X10 Community Forum

📸Cameras & Camera Software => Legacy non Wi-Fi X10 Cameras => Camera General Discussion => Wireless Cameras(non IP) => Topic started by: excoelis on November 26, 2009, 10:07:17 AM

Title: Setting up 4 Cameras
Post by: excoelis on November 26, 2009, 10:07:17 AM

H everyone I am new to x-10 and was kinda hoping for some giudance as I really can't find anything in the instructions online.
I have 3 X-Cam 2's and 1 x Motion Detector flodd cam. I got the 3 x x-cams up and running with Vanguard. My question is can I watch all 3 of these cameras on Vanguard at teh same time? I have been able to get 2 of them to work but they don't watch live video on both just one at a time, I am still working on the 3rd and the motion detector one.
Thanks

Title: Re: Setting up 4 Cameras
Post by: Brian H on November 26, 2009, 10:16:35 AM

You may find some added instructions here:
http://www.x10.com/instructions/
http://kbase.x10.com/wiki/Cameras

I believe only one wireless camera can be sending at a time. As they all use the same transmitting frequency and would interfere with each other if more that one is on.