X10 Community Forum

📸Cameras & Camera Software => Legacy non Wi-Fi X10 Cameras => Camera General Discussion => Vanguard Internet Control Center => Topic started by: centra on November 01, 2009, 02:09:33 PM

Title: How do I veiw my camera online?
Post by: centra on November 01, 2009, 02:09:33 PM

How do I see my camera online when I am away from this computer?

Title: Re: How do I veiw my camera online?
Post by: Outlander on November 28, 2009, 09:23:53 PM

Well first off hello folks, Not sure if anyone has explained it but herewe go:
1. on the man Vanguard screen (your pc), click optons, then remote user. There is a access ID number, write it down. then you have to crate a password. now click on the connect button. it should display (online)
2. now open your browser to (http://gate.x10.com/).
3. put your mouse curser on the little vanguard window and right click on it to make it 100%. You sould be looking at the remote vanguad sceen.
4.on the remote vanguard screen click on the connect button. a pop up window will display asking for a user name, password and access id. create a name put your password in and put the access id you wrote down, then hit connect.
5. the screen should say accessing image. wait a few seconds and it should come up. But if you have low bandwidth it might not come up to fast.

it took me a while to get it up and going. Hope this helps.  >!