X10 Community Forum
📱X10 WIFI => 🗯General Discussion => Topic started by: frmichaud on December 15, 2022, 09:51:43 PM
-
Strange problem with my WM100
I use a New wall lamp module with code M1 My program is
16H lamp M1 at 22/24 light It works
17H30 M1 at 0 it works
18H15 M1 set a 22/24 BUT the WM100 is at very low around 10/24 and impossible to correct with the samsung tablet
19H M1 Set at 70% and it works fine
Can somebody ex[laim why the order of 18H15 is not working
Francois
-
Try changing "17H30 M1 at 0 it works" from 0 to OFF.
-
Originaly it was 0 OFF , I place 1 in the bar of luminace and that dont work more
Francois
-
What is the model of the module?
Appliance or Dimmer?
If it is a dimmer. Is it before Soft Start or Soft Start?