I thought I had things under control.I have a active eye sensor in the front of my house.I wanted it to controll my porch light,my walk light and two lights on the front of my garage.My garage is attached to my house next to my living room.If I put the rr501 transceiver in the living room next to the garage the porch light and the walk light will come on when motion is detected but the lights on the garage won't come on.If I put the transceiver in the garage the garage lights will come on and the porch light and walk light will not.I can turn them all on by remote control regardless of where the transceiver is.
I also have a pr511 floodlight on my barn in the back yard.I can't get it to respond to the delay I set it.I have to turn it off by remote.I am going nuts trying to set this up!
When the delay shut off my front lights tonight it turned on my back floodlight on my yardbarn.Could I get another transceiver to take care of the front light problem?Also my floodlight will not shutoff.I have to shut it off with remote.I am beginning to wonder if its worth it.
When the delay shut off my front lights tonight it turned on my back floodlight on my yardbarn.Could I get another transceiver to take care of the front light problem?Also my floodlight will not shutoff.I have to shut it off with remote.I am beginning to wonder if its worth it.
It turned on because of the UnitCode + 1 Dusk/Dawn feature of your ActiveEye Motion detector. This feature can be turned off, or change your unit codes from "1" & "2" to (e.g.) "1" & "3".
As Boiler mentioned, it sounds like you have either a phase issue or signal path integrity issue from where the front transceiver is located and the lights you are controlling via motion detection are on your house circuit. I suspect you can control them from your remote because of the back transceiver being electrically better located.
You didn't mention if the 2nd transceiver is also a RR501(?) I do know they are polite, but I can't say for sure how they react when 2 receive an RF signal simultaneously. Having both set to House Code "A" could be causing problems.
Maybe try removing the back transceiver and seeing if you can turn the front lights on & off with your remote & motion detector. Once you get that going, re-introduce the back transceiver and see what happens.
I have a active eye sensor in the front of my house.I wanted it to controll my porch light,my walk light and two lights on the front of my garage.My garage is attached to my house next to my living room.If I put the rr501 transceiver in the living room next to the garage the porch light and the walk light will come on when motion is detected but the lights on the garage won't come on.If I put the transceiver in the garage the garage lights will come on and the porch light and walk light will not.I can turn them all on by remote control regardless of where the transceiver is.
Tried turning dryer on.I still have same problem.I have 2 transceivers in the house.One is on the backside of house and it is set at a2.It is for my flood light on my yardbarn and my back porch light.
On the front side of my house I have a transceiver and it is set for A1.It is for my walk light,porch light and front garage lights.Could this set up be wrong?
When the delay shut off my front lights tonight it turned on my back floodlight on my yardbarn.Could I get another transceiver to take care of the front light problem?Also my floodlight will not shutoff.I have to shut it off with remote.I am beginning to wonder if its worth it.
Iam using a kr22a credit card remote.I will take out second transceiver tonight and see how it goes.Right now I have another life and will return later.
By the way ..can this remote be programmed so that the second row of buttons control something that is on household code B while the first row of buttons are on A?
Put one transceiver in the garage and one in the living room.All lights come on now at the same time.The first time they didn't shut off together but the next 2 times they did.Do you think I should still get a plug in coupler?If so just the standard coupler or the one that amplifies?
Both transceivers are about equal distance from sensor.I tried with one transceiver in living room ..lights would only come on in living room.When I moved it to garage only the garage lights would come on.I guess I will leave it this way for awhile.Thanks alot for all of your help.