Please login or register.

Login with username, password and session length

Author Topic: Dialer doesn't dial  (Read 2598 times)

Ramki

  • Guest
Dialer doesn't dial
« on: December 22, 2005, 08:45:44 PM »

hello,
I have just purchased a DS7000 X10 home
security system. Tested the alarm. It sound
s alarm when tripped, status lights are
good but it doesn't dial the phone numbers
I programmed. I think I heard the dialing
once during my several trials. But the call
didn't complete.
I have SBC DSL on my phone line. Does this
make any difference to the X10 system?

Thanks a lot.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13260
Re: Dialer doesn't dial
« Reply #1 on: December 23, 2005, 06:42:35 AM »

Should not make a difference with DSL. Only
thing is make sure the DS7000 is on one of
the filtered connections. I believe that
someone indicated that the unit does not
dial out with a panic trip only with a
sesnor type trip.
Logged

Kishore

  • Guest
Re: Dialer doesn't dial
« Reply #2 on: December 29, 2005, 10:54:48 PM »

I have telus adsl and I have connected the
DS7000 to the phone line without the adsl
filter and it dials out ok. if I connecte
it via a adsl filter the DS7000 does not
dial out. Hope this helps
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13260
Re: Dialer doesn't dial
« Reply #3 on: December 30, 2005, 06:27:54 AM »

Interesting. I will have to keep thet fact
in mind. I would have thought the filtered
outlet would be better?
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.