X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: chuck on May 15, 2005, 12:08:03 AM

Title: XPD13 Fan Wiring
Post by: chuck on May 15, 2005, 12:08:03 AM

Anyone know how to wire the XPD13 inductive
wall switch for a ceiling fan?

Title: Re: XPD13 Fan Wiring
Post by: Brian H on May 15, 2005, 01:03:23 PM

I take it you mean the XPDI3.
Black of switch to Hot AC Line
White of switch to Neutral AC Line
Red of switch if not used for 3 way tape up
Blue of switch to Hot Fan AC wire
Other wire in fan to AC Neutral

Title: Re: XPD13 Fan Wiring
Post by: Tigger on May 16, 2005, 04:53:53 PM

 
Note regarding the XPDI-3 -

This switch may cause SOME fans to HUM,
SOMETIMES QUITE LOUDLY.

If your fan has a pull-chain speed control,
changing the speed to a lower setting using
the pull-chain may reduce the hum.



T

Title: Re: XPD13 Fan Wiring
Post by: chuck on May 17, 2005, 11:43:12 PM

Thanks for info. Wired in and works best
with pull chain on 2 (1-3).