X10 Community Forum

💬General Category => General Discussion => Topic started by: rjp on March 26, 2024, 12:33:01 AM

Title: Documentation for Leviton 6316 / XPT3 4 Channel Dry Contact Controller
Post by: rjp on March 26, 2024, 12:33:01 AM

Looking for Documentation for Leviton 6316 four input Dry Contact Controller.  The one piece I found is not correct. 

Title: Re: Documentation for Leviton 6316 Dry Contact Controller
Post by: Brian H on March 26, 2024, 06:24:39 AM

The X10 Cross Reference Guide.
Shows a Leviton 6316 was an X10Pro XPT3 and the 6315 an XPT2.
The scanned Leviton document page with some info attached.
The page may give you some additional information.
As the 6315 is a Maintained Dry Contact Transmitter and the 6316 is a Momentary Dry Contact Transmitter.

Title: Re: Documentation for Leviton 6316 Dry Contact Controller
Post by: Brian H on March 26, 2024, 04:12:57 PM

Found a Leviton 6315 manual.
That may give you some added data.

Title: Re: Documentation for Leviton 6316 Dry Contact Controller
Post by: rjp on March 27, 2024, 01:10:11 PM

Thanks for the docs.  The two versions of the dry contact 4 channel modules differ in their wire color 1-4 assignments in addition to one transmitting on a contact open and the other does not transmit on an open.

I found the line monitoring logic useful to prevent collisions when two or more of these modules are used.

Thanks again.  >!