X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Software Problems & Bugs => Topic started by: christopher on September 09, 2005, 04:11:13 PM

Title: XP Pro update WARNING
Post by: christopher on September 09, 2005, 04:11:13 PM

My Active Home Pro was working fine before I
decided to update the drivers through Windows
Update. Windows Update "updated" and Intel
video device as well as an X-10 USB device.
After I updated these my Active Home Pro
stopped working. Here's what I've done to try
to fix this situation (still no solution yet)
- Disassembled my entire wireless video system
- Placed one XC18-A camera on my desk
- Placed one VR-30A (video reciever) on my desk
- Placed one Activehome Pro device on my desktop
- Set all applicable devices to house A unit 7

Pretty simple setup? Yes, but the camera is
not recognized by the software for AH Pro.

In XP Pro - I have removed the Intel device
in the Device Manager and rolled back the
drivers for the X-10 AH Pro device and
rebooted... still no video signal.

Any help would be appreciated. Thanks.

Title: Re: XP Pro update WARNING
Post by: bronco on September 09, 2007, 12:34:45 PM

after making sure the intel driver is gone, reboot, reload the drivers, get them from the x10 site http://www.x10.com/support/support_soft1.htm 

Title: Re: XP Pro update WARNING
Post by: Tuicemen on September 09, 2007, 08:40:29 PM

christopher :
There are several posts about this problem and how to fix (get AHP to see the VA11A drivers!)you can do a Advanced search for VA11A
or check this link Topic: VA11A does not work  (Read 22099 times)   (http://www.x10community.com/forums/index.php?topic=8083.msg49642#msg49642)

Title: Re: XP Pro update WARNING
Post by: zach1234 on November 20, 2007, 10:04:01 PM

I told microsoft to not install that on my system.