Please login or register.

Login with username, password and session length

Author Topic: Trouble getting Active Home Pro unit to work  (Read 2942 times)

toywizard

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
Trouble getting Active Home Pro unit to work
« on: July 22, 2006, 04:25:54 PM »

Anyone else having probs getting the Active Home USB unit Model CM15A ?
I run XP and I have tried it on 3 computers.
I follow the directions per the manual and all on three machines I get "Unknow USB Device, One of the USB devices attached to this computer has malfuntioned and windows does not recognize it".

I love X10 stuff, used it for years at home and work. Does this sound like a bad unit or???
Logged

-Bill- (of wgjohns.com)

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 81
  • Posts: 1340
  • He's just this guy. You know?
    • wgjohns.com
Re: Trouble getting Active Home Pro unit to work
« Reply #1 on: July 25, 2006, 09:42:21 PM »

Possibly.

Assuming you have indeed done everything right.  I have observed that my CM15A will not be recognized when plugged into a USB 2.0 port!  If you have an older style USB port on one of your machines, try using that.

Hope that helps.
Logged
-Bill- (of wgjohns.com)
bill@wgjohns.com

In the real world, the only constant is change.

When I'm online you can find me in the Home Automation Chat Room!

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: Trouble getting Active Home Pro unit to work
« Reply #2 on: July 25, 2006, 11:08:16 PM »

I had the same problem - when I got AHP I plugged the USB cable into a USB2 port. The CM15A would not be recognized. I switched it to a spare USB1 port (I swapped the CM15A with a device that didn't care what type of USB post it was plugged into) and it has been properly seen by XP.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.