X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: bakerb95619 on July 27, 2019, 11:52:25 PM

Title: Purpose / Use of the A-B button on HD23A IBM Home Director X10 Remote
Post by: bakerb95619 on July 27, 2019, 11:52:25 PM

I'm hoping that the A-B button on the HD23A IBM Home Director X10 Remote is to switch between A & B house codes, however I haven't been able to get it to work. Does anyone know the sequence required to use the A-B button? I've tried different orders of the Home Director, module code, and A-B button but none are working.

Thanks,
Bill

Title: Re: Purpose / Use of the A-B button on HD23A IBM Home Director X10 Remote
Post by: Brian H on July 28, 2019, 08:06:31 AM

From what I have seen. The HD23A is an X10 UR19A. Mine has the A-B button on it but not well mentioned in the manual. Hopefully someone with a Home Director may provide more information.

If you want to look at the UR19A manual it is available here as the X10 wiki link seems to be busted.
https://thex10shop.com/pages/X10-Instruction-Manuals

Smarthome has a scan of the manual for the Home Director kit they sold at one time.
https://cache-m2.smarthome.com/manuals/1143.pdf