🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: frichmond1 on November 11, 2006, 12:00:30 AM
Title: Work sometimes
Post by: frichmond1 on November 11, 2006, 12:00:30 AM
Some times my signal from my CM11A works and other times it won't I tryed using a maxi controler with the same results
What do you think my problem is.
Thanks
Title: Re: Work sometimes
Post by: Puck on November 11, 2006, 12:39:33 AM
Most likely a signal noise, signal sucking or power line phase issue.
These are well covered topics, do a search and I'm sure you will find lots of hints & suggestions. ;)
Let us know how you make out and if you still have problems.
Title: Re: Work sometimes
Post by: Brian H on November 11, 2006, 06:43:10 AM
As Puck indicated. Typical symptoms of powerline noise; signal suckers and opposite phase control issues..
Title: Re: Work sometimes
Post by: TakeTheActive on November 11, 2006, 12:43:37 PM
There's a Troubleshooting STICKY right at the top of the screen in the same forum that you posted in - have you read it? :-[
PLENTY of help to be found here, already asked and answered. ;)