X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: pume on November 23, 2006, 10:22:52 AM

Title: Can use X10 230Vac/50Hz in 220Vac/50Hz ?
Post by: pume on November 23, 2006, 10:22:52 AM

http://www.simplyautomate.co.uk/productDisplay.asp?prodID=3722

product Detail

Length 160mm, Width 70mm, Height 55mm
AC supply:             230VAC/50Hz
X-10 Powerline:       120 KHz/2.5vp-p
Backup battery:       2 x AAA cell (not supplied)
Backup time:          1 week typical
Events/macros stored:    25 typ/39 max



this product can use in 220VAC/50Hz ???

Title: Re: Can use X10 230Vac/50Hz in 220Vac/50Hz ?
Post by: Brian H on November 23, 2006, 10:48:33 AM

Do the power connections match your countries outlets?
Most devices have a voltage tolerance. I would think that 220 VAC 50 Hz should work ok. Maybe others that have used it will give better data.

Title: Re: Can use X10 230Vac/50Hz in 220Vac/50Hz ?
Post by: pume on November 23, 2006, 11:08:06 AM

 ;D thank

Title: Re: Can use X10 230Vac/50Hz in 220Vac/50Hz ?
Post by: gil shultz on June 13, 2007, 04:12:48 AM

The voltages you give are nominal voltage and they have a wide tolerance.  Going from the 230 to 220 should pose no problems.  Most likely going the other way will be ok as well. 
Gil Shultz