X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: marineau on January 08, 2007, 07:49:07 PM

Title: Many methods and many results
Post by: marineau on January 08, 2007, 07:49:07 PM
I tried many methods to increase a Macro speed. These results are a time needing after press a button ON to turn On a lamp module !
So I give you these methods with my results:

1 - SS13A(B1-ON) -> CM15A(standalone) -> LM465(B1-ON) = 833ms
2 - SS13A(B1-ON)  -> CM15A(standalone)Macro -> LM465(C1-ON) = 933ms
3 - SS13A(B1-ON)  -> CM15A  -> (AHP)Macro -> CM15A  -> LM465(C1-ON) = 3000ms
4 - SS13A(B1-ON)  -> CM15A  -> MySoftwareMacro -> CM15A  ->LM465(C1-ON) = 1100ms
5 - SS13A(B1-ON)  -> TM751  -> PowerLine -> CM15A  -> MySoftwareMacro -> CM15A  ->LM465(C1-ON) = 1300ms
6 - SS13A(B1-ON) -> CM15A  -> MySoftwareMacro -> CM11A ->LM465(C1-ON) = 900ms
7 - SS13A(B1-ON) -> CM15A  -> MySoftwareMacro -> CM11A ->LM465(C-AllLightsOn) = 510ms

I share with you my results. I would appreciate that some of you shares with us your results, just add to this text your results  ;)
Title: Re: Many methods and many results
Post by: Charles Sullivan on January 08, 2007, 08:15:25 PM
Try:
  SS13A(B1-ON)  -> CM15A (RF macro) -> TM751  -> PowerLine  -> LM465(C1-ON)

Title: Re: Many methods and many results
Post by: marineau on January 08, 2007, 10:13:55 PM
Quote from: Charles Sullivan on January 08, 2007, 08:15:25 PM
Try:
  SS13A(B1-ON)  -> CM15A (RF macro) -> TM751  -> PowerLine  -> LM465(C1-ON)

I dont have a CM17A  to send a RF command.. maybe that another person can try this !!!
But TM751  needing normally 850ms to send a command C1-ON, so I believe that a result could be between 900ms and 1000 ms !

If anyone have others moduls or others methods and can tell us, you are welcome !
Title: Re: Many methods and many results
Post by: Charles Sullivan on January 08, 2007, 10:22:45 PM
Quote from: marineau on January 08, 2007, 10:13:55 PM
Quote from: Charles Sullivan on January 08, 2007, 08:15:25 PM
Try:
  SS13A(B1-ON)  -> CM15A (RF macro) -> TM751  -> PowerLine  -> LM465(C1-ON)

I dont have a CM17A  to send a RF command.. maybe that another person can try this !!!
But TM751  needing normally 850ms to send a command C1-ON, so I believe that a result could be between 900ms and 1000 ms !

If anyone have others moduls or others methods and can tell us, you are welcome !

You can send RF commands in a macro with the CM15A.