X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: marineau on January 28, 2007, 11:26:41 AM

Title: Problem
Post by: marineau on January 28, 2007, 11:26:41 AM

I has a problem this morning:

8:00AM  With PalmPad, sent command to CM15A (StandAlone) , All Ws467
            and All LampModul turn OFF or ON fine when pressed on his appropriate button !
9:00AM   With PalmPad, sent command to CM15A (StandAlone) , All LampModul
            turn OFF or ON fine. But fo all Ws467 run fine when Pressed on Button OFF, but not for ON command !
9:10AM  All Run fine like 8:00AM

Why does all ws467 modul ran fine at 8:00AM, but at 9:00AM, just a command OFF ran fine ? 
Why at 9:10AM and now all ws467 running fine on ON and OFF command ? 

Note that I did not change anything between these periods of time !

I don't understand !

Title: Re: Problem
Post by: dave w on January 29, 2007, 12:15:32 PM

You have been playing with X10 for a long time, is this the first time this has happened? 
Research what in your home turns on at 9:00 AM and off at 9:10 AM.

Title: Re: Problem
Post by: marineau on January 29, 2007, 05:39:51 PM

Quote from: dave w on January 29, 2007, 12:15:32 PM

You have been playing with X10 for a long time, is this the first time this has happened? 
Research what in your home turns on at 9:00 AM and off at 9:10 AM.

It happened another time after few minuts that I wrote this topic  ...

I disconnected my CM15A and wait while 5 minuts, reconnect, and now all run fine...
Probably a BUG in CM15A !

Thanks