X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: dls6116 on February 19, 2007, 05:53:57 PM

Title: can I use a PCW03 remotely with a WS12-A/WS14-A
Post by: dls6116 on February 19, 2007, 05:53:57 PM

When talking to sales I was told I could use a PCW03 to remotely control a circuit with a WS12-A/WS14-A set of switch's.  I would like to run power to the PCW03 in a different circuit then the WS12-A and have it send a signal over the house wiring to the WS12-A.  if this is really possible how do I set up the two switch's?

Title: Re: can I use a PCW03 remotely with a WS12-A/WS14-A
Post by: Brian H on February 19, 2007, 06:59:32 PM

No it is the X10Pro version of a companion switch [X10 WS14A]. Used in a three way light circuit. It does not transmit an X10 signal over the powerline and must be directly connected to the master switch.