X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Wish List => Topic started by: ltboop on March 12, 2007, 11:46:22 PM

Title: My Wish is for a temperature/humidity sensor
Post by: ltboop on March 12, 2007, 11:46:22 PM

I would like to see a plug in sensor that would report temperature and humidity for the room in which it is installed.  All I need is a digital readout in AHP,  of the temperature and humidity and a way to log these readings (by  minutes, hours, or time of day, any one of these would work)   I know there are other solutions to this,  but I am using X10.  The Active Home Pro desktop is the perfect place(in my case) to view this and I don't want to have any more systems to take care of.  Also I am not an electrical  engineer or a software developer, so building this is out of the question. 

Thanks
ltboop

Title: Re: My Wish is for a temperature/humidity sensor
Post by: nklght on March 26, 2007, 01:00:20 AM

I would like to see the same thing, so I could use a macro to turn on or off a device.  Unfortunately, there is module which can be used with a powerlflash unit to accomplish what you probablly want to do.

Title: Re: My Wish is for a temperature/humidity sensor
Post by: LI-Bob on April 15, 2007, 07:16:23 PM

I wish for the same as well. Both indoor and outdoor sensors. Perhaps a module that will receive a 0- 10 volt signal that any sensor could be configured using software to generate the proper output (Temp, humidity, pressure, proximity)

Title: Re: My Wish is for a temperature/humidity sensor
Post by: Walt2 on April 17, 2007, 08:04:25 AM

There is the Templinc, though it does only temperature and not humidity.

Its available from SmartHome (http://www.smarthome.com/1625.HTML) and Home Depot (http://www.homedepot.com/prel80/HDUS/EN_US/jsearch/product.jsp?pn=100396361).