X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: Hemingray on April 27, 2007, 08:25:09 PM

Title: X10 Powerhouse Remote RT504
Post by: Hemingray on April 27, 2007, 08:25:09 PM

I've recently acquired and restored an X10 Powerhouse RT504 Remote. (Similar to the palmpad), I'd like to know what X10 receivers/transceivers this remote would work with (TM751, etc?)

Restored: Someone had left batteries in it that leaked badly. Had to replace all battery contacts and leads.

Title: Re: X10 Powerhouse Remote RT504
Post by: Dan Lawrence on April 27, 2007, 10:36:47 PM

Try this link: http://software.x10.com/pub/manuals/rt504.pdf   It seems that it does not work with AHP, but the Protector Plus Security system

Title: Re: X10 Powerhouse Remote RT504
Post by: Brian H on April 28, 2007, 05:32:24 AM

Thanks for the link to the instructions Dan.
The RT504 instructions look very confusing as i just read it.
The security console can also pass regular X10 signals and the instructions mention an RR501 so a TM751 should also pass commands from the RT504.

Title: Re: X10 Powerhouse Remote RT504
Post by: Hemingray on May 03, 2007, 12:15:18 PM

UPDATE 5/03

First 4 house codes on my RT504 (1-4/9-12 on/off) have failed. 5-8/13-16 on off still function, As do the dimmer buttons. However, pressing the first four code buttons either way produces nothing.