X10 Community Forum

🔌General Home Automation => Automating Your House => Topic started by: poppops on October 04, 2007, 09:32:49 PM

Title: Total Newbie
Post by: poppops on October 04, 2007, 09:32:49 PM

Hi group,

This is my maiden voyage so be gentle. I have a house full of RS Plug-n-Power devices. What I need is a single wall switch (that can be mounted in a work box just like a standard wall switch) which is hardwired to the AC supply and that can be programmed to a specific house/unit code. Does such a device exist?

Thanks,

Walt

Title: Re: Total Newbie
Post by: HA Dave on October 04, 2007, 09:36:33 PM

Wall Switch Module (WS467) (http://www.x10.com/automation/ws467_s.html) <click the link.

Title: Re: Total Newbie
Post by: poppops on October 04, 2007, 09:49:03 PM

Quote from: Dave_x10_L on October 04, 2007, 09:36:33 PM

Wall Switch Module (WS467) (http://www.x10.com/automation/ws467_s.html) <click the link.

Hi Dave,

Thanks for the quick reply. I know about this unit, I have several. This is a receiver that replaces a standard switch. What I need is a hardwired stand-alone single switch that is a transmitter, one that will control receivers that are not wired to itself.

I hope I'm stating my case clearly, thanks.

Walt

Title: Re: Total Newbie
Post by: HA Dave on October 04, 2007, 10:13:20 PM

Ther are units...and even special ones (http://www.smarthome.com/4201wr.html). I don't have any and can't advise... but keep checking back.

Title: Re: Total Newbie
Post by: HA Dave on October 04, 2007, 10:17:15 PM

Another LINK (http://www.x10pro.com/pro/catalog/inwall.transmitters.html#popular)