X10 Community Forum
🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: Seadawg on April 29, 2008, 08:08:28 PM
-
I have re installed active home pro. All of my lamp modules are model 6381, except for one which is a plug in module. It is the only one that will respond to the x10 commands. All lights can be controlled with the x10 remotes. I also have a blocking coupler installed in the panel to reduce interference. Any ideas?
-
What names on on your various modules?
All lamp modules, regardless of what name/model number are all made by the same factory and are all addressed by AHP as a standard lamp module. AHP doesn't care whose name is on the case as long as it's a lamp module.
How have you created them in AHP?
-
I have re installed active home pro. All of my lamp modules are model 6381, except for one which is a plug in module. It is the only one that will respond to the x10 commands. All lights can be controlled with the x10 remotes. I also have a blocking coupler installed in the panel to reduce interference. Any ideas?
Seadawg,
This is a recurring theme with AHP and the Leviton 6381 switches.
Let us know if your problems are related to Macros/Timers or with the graphical interface (can't toggle the switch from the screen).
Please try re-identifying the units as Appliance modules or Fluorescent wall switches in AHP. If this functions correctly it will confirm that it's a AHP interface problem and Not signal levels or noise.
Get back with us,
Boiler