X10 Community Forum

💬General Category => General Discussion => Topic started by: fanwar on September 22, 2008, 10:55:16 PM

Title: can i use eagle eye sensor and tigger differentdimmer fixture modle :XPDF?
Post by: fanwar on September 22, 2008, 10:55:16 PM

i am trying to trigger 6 different dimming fixture module (lights) with one eagle eye sensor.
Is it possible? to use one sensor and trigger different lights with different micros ?

thx

faisal

Title: Re: can i use eagle eye sensor and tigger differentdimmer fixture modle :XPDF?
Post by: Tuicemen on September 23, 2008, 09:40:32 AM

Quote from: fanwar on September 22, 2008, 10:55:16 PM

i am trying to trigger 6 different dimming fixture module (lights) with one eagle eye sensor.
Is it possible? to use one sensor and trigger different lights with different micros ?

thx

faisal

Quick Answer is Yes! But more info is needed to give a true answer! :'
You most likely would need the smartmacro plug-in and AHP to use conditions so all lights work the way you wish!
IF you supply a detailed description of what you'd like to accomplish some one will supply you with a detailed answer!

Title: Re: can i use eagle eye sensor and tigger differentdimmer fixture modle :XPDF?
Post by: dash on September 25, 2008, 04:21:57 PM

Hi

The set-up I'm using triggers various lights - using the dusk signal from the second address of an eagle eye sensor (to start the light switching sequence) and conditional macros and flags to provide the control (I don't want the lights to illuminate before certain times on different days of the week).

See here... http://www.x10community.com/forums/index.php?topic=15926.0

Hope this gives you the confidence to proceed. My setup has worked flawlessly for over 2 months now.


Dave