X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Topic started by: betatester on September 24, 2008, 03:15:57 AM

Title: Set initial macro delay to 00:00:00
Post by: betatester on September 24, 2008, 03:15:57 AM
By changing the registry key:
HKCR\CLSID\{001000AF-2DEF-0103-10B6-DC5BA692C858}\X10\AHP\Settings\System\MacroDelay from 1000 (decimal) to 0 (decimal)
all initial macro timers will have the value 00:00:00
Changing to 1 second is not possible

Note: Change this value when AHP is not running and check the register value after each configuration change via Preferences
Title: Re: Set initial macro delay to 00:00:00
Post by: Puck on September 24, 2008, 10:11:27 AM
The delay default can also be changed within AHP in the Smart Macros tab under tools/preferences.  ;)
Title: Re: Set initial macro delay to 00:00:00
Post by: betatester on September 24, 2008, 11:23:13 AM
Aah...you can fill in 0 there   ;D
I was just pressing up & down to a minimum of 1  8)
Title: Re: Set initial macro delay to 00:00:00
Post by: Tuicemen on September 24, 2008, 01:23:29 PM
Aah...you can fill in 0 there   ;D
I was just pressing up & down to a minimum of 1  8)
I believe you can specify a number for all the options in the program instead of just using the arrows!
>!