X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Software Problems & Bugs => Topic started by: jcharland on October 24, 2008, 09:10:38 PM

Title: Missing AM/PM in Timer creation
Post by: jcharland on October 24, 2008, 09:10:38 PM

I've come across the strangest problem yet with AHP 3.228.

When creating a new timer, I used to be able to scroll hours, minutes and am/pm.  The am/pm setting seems to have disappeared.  If I select 'Display in 24 hour format', I can scroll the hours from 0-23.  If I then unselect that option, I can only scroll the hours 1 can scroll 0-12.  Am I dreaming???

Thanks in advance for any advice you can give me?

Title: Re: Missing AM/PM in Timer creation
Post by: BaBaLou. on October 24, 2008, 10:41:57 PM

Hi jcharland and welcome to the forum,

I have both ver, 3.228 and 3.236 running on two separate locations. All the timers on all my modules as well as all timers on any macro are all showing AM/PM when 24 hr mode is not checked. So my question to you is of which type of module or macro was it or are all your times doing the same. After changing from reg to 24hr and back, just click on the time area and the AM/PM comes out again.

Sorry for not helping yet. but just wait and we will see what other may have to say about their setup.