X10 Community Forum
💬General Category => General Discussion => Topic started by: ched0n on May 22, 2009, 06:41:02 PM
-
I'm lost as lost can be and I need some help...
I want to buy several x 10 wired cameras and send each camera image to one central cpu, now from that cpu I would like to send those images to several tv screens through out the whole house. Im in the reno stage at my house so I would like everything to be behind the walls out of sight can anyone lead me in the right directions as to how I can accomplish this.........
Thanks, Ched0n
-
B:( I know the answer to this but its not all that great, you will need a few splitter boxes,
the best option would be into a computer using a pvr hardware/software. Then from there out to TV using X10 wireless video sender or a 30 foot VGA cable, hope that helps out a bit...
-
I'm lost as lost can be and I need some help...
..... Im in the reno stage at my house so I would like everything to be behind the walls out of sight can anyone lead me in the right directions as to how I can accomplish this.........
Ahh Home renovation!
Today's homes require more wiring than homes have ever required before. Cable (and/or satelite) TV, Closed circuit TV, security sensor hard-wiring, broadband Internet, phone, music, fiber optics (for future use) and of course... regular AC 120 volt electric (and plenty of it).
Look for books on "structured wiring (http://www.amazon.com/s/ref=nb_ss_b_0_17?url=search-alias%3Dstripbooks&field-keywords=structured+wiring+design+manual&sprefix=structured+wiring)"... or better yet... consult with a professional.
P.S. You might be able to use channel 3 for your cameras... if you modulate it at the cable box.
-
interesting challenge, but keep in mind that evrytime you use splitters, you lose signal strength and by the way image quality
Good luck