X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: Brandt on December 08, 2009, 01:24:00 AM

Title: overhead chain link lamp
Post by: Brandt on December 08, 2009, 01:24:00 AM

I have one of those chain link lamps that hangs from hooks on the ceilings it has a rotary wheel for local control, i ensured that it was set to on, and pre-programmed a socket rocket for this lamp. after installing the socket rocket, i can not get it to work with this lamp...even with a maxi controller on the same receptacle.

Title: Re: overhead chain link lamp
Post by: Brian H on December 08, 2009, 06:01:28 AM

The rotary wheel switch. It is a plain on and off and not some intermediate levels between on and off.
Standard Incadescent bulb in the Socket Rocket?
I would try it back in the socket you programmed it in and make sure it still functions.

Title: Re: overhead chain link lamp
Post by: Brandt on December 08, 2009, 12:09:50 PM

Yes i believe its just on/off

I'll fool around with it more tonight and update here...