X10 Community Forum

🔌General Home Automation => Automating Your House => Troubleshooting Automation Problems => Topic started by: RedBeard on December 18, 2009, 10:19:37 AM

Title: New LM465 lamp module wont work
Post by: RedBeard on December 18, 2009, 10:19:37 AM

It work for the first day I had it.  Now it will not recognize any remote.  I have unplugged it and plugged it back in.  When I flipped the lamp switch it comes up slowly.but the remotes will not turn it off or on.

Title: Re: New LM465 lamp module wont work
Post by: dave w on December 18, 2009, 12:24:00 PM

Quote from: RedBeard on December 18, 2009, 10:19:37 AM

It work for the first day I had it.  Now it will not recognize any remote.  I have unplugged it and plugged it back in.  When I flipped the lamp switch it comes up slowly.but the remotes will not turn it off or on.

Plug the lamp module in to same outlet as the tranceiver (or wired controller if you have one) does it work now?

Title: Re: New LM465 lamp module wont work
Post by: RedBeard on December 19, 2009, 05:51:01 AM

is that the same as my security console?

Title: Re: New LM465 lamp module wont work
Post by: Brian H on December 19, 2009, 06:11:20 AM

Yes the security console is fine for the test.

Title: Re: New LM465 lamp module wont work
Post by: dave w on December 21, 2009, 10:47:07 AM

Quote from: Brian H on December 19, 2009, 06:11:20 AM

Yes the security console is fine for the test.

Thanks Brian, my Kreskin mind reading ability was on the blink that day.