X10 Community Forum

🖥️ActiveHome Pro => ActiveHome Pro General => Help & Troubleshooting => Topic started by: paet101 on February 11, 2010, 07:33:33 PM

Title: Timers running at wrong times
Post by: paet101 on February 11, 2010, 07:33:33 PM

I'm running AHP 3.236 to control lights throughout the house. I've been using X-10 for about 6 years and so I know it can be a bit flakey.

Now my timers work for a few days then suddenly start to run about 60 minutes early. The only way I've found to resolve the problem is to clear the CM15 batteries and download (no big deal once in a while but I'm dong it every 3-4 days which is becoming a real pain). Here are a few details
- all timers are affected
- when I check the interface time it appears to be correct
- my CM15 is not connectd to my PC
- I upgraded to this version about 7 months ago
- I've tried moving the CM15 to different receptacles but the issue remains
- I have not replaced the batteries lately but I don't think that should matter.

Any suggestions?

Title: Re: Timers running at wrong times
Post by: Dan Lawrence on February 12, 2010, 06:49:13 AM

3.236 is a known buggy version of AHP.   To remedy the timer problem go to http://software.x10.com/pub/applications/activehome/ and look for  ahp_updt_204.exe   Save that and install it over what you have now. It will not harm any timers or macros you have.  Once it is installed, use the update link under Tools to update AHP to 3.228.